Creature stats calculation

This page explains how the value of the stats of creatures is calculated.

Each species has 6 variables for each stat that affect the final stat-value:

• B: base-value
• Iw: increase per wild-level as % of B
• Id: increase per domesticated level as % of Vpt (value post-tamed, see Explanation of the parts)
• Ta: additive taming-bonus
• Tm: multiplicative taming-bonus
• TE: taming effectiveness when tamed
• IB: imprinting bonus when bred

In 256.0 an additional multiplier, the TamedBaseHealthMultiplier (TBHM) was introduced, that lowers the health of a few creatures right after taming, before the additive taming-bonus is applied.

Some species have another multiplier for the Id value for health, the ExtraTamedHealthMultiplier (ETHM). The values on this wiki already have this extra multiplier applied to the Id where it is not 1.

The Tm and TmM are only affected by the TE if Tm > 0, i.e. a malus won't get less bad if the TE is lower. The Tm is negative for aberrant-variants (-0.04).

The imprinting bonus IB only affects bred creatures, and all stat-values except of stamina and oxygen (it does affect the torpor-value).

The game has further global variables for each stat, that affect the variables above:

• IwM: increase per wild level modifier
• IdM: increase per domesticated level modifier
• TaM: additive taming-bonus modifier
• TmM: multiplicative taming-bonus modifier

The values for TaM, TmM, and IdM can be found in the TestGameMode.uasset file located in Game/PrimalEarth/CoreBlueprints/.

Currently these modifiers for health are:

• TaM = 0.14
• TmM = 0.44
• IdM = 0.2

The modifiers for melee damage are:

• TaM = 0.14
• TmM = 0.44
• IdM = 0.17
• IwM is always 1 for official servers

Three of the four modifiers can be found in the TestGameMode.uasset file located in Game/PrimalEarth/CoreBlueprints/

• TaM as property PerLevelStatsMultiplier_DinoTamed_Add
• TmM as property PerLevelStatsMultiplier_DinoTamed_Affinity
• IdM as property PerLevelStatsMultiplier_DinoTamed

While IwM is defined by property PerLevelStatsMultiplier_DinoWild.

The imprinting bonus is scaled by the global variable:

• IBM: as value of BabyImprintingStatScaleMultiplier

By default IBM is set to 1.0.

Assume that a creature has upleveled a certain stat in the wild Lw times, was upleveled a stat by a player Ld times and was tamed with a taming effectiveness of TE. Then the final value V of that stat (as you see it ingame) is

V = (B × ( 1 + Lw × Iw × IwM) × TBHM × (1 + IB × 0.2 × IBM) + Ta × TaM) × (1 + TE × Tm × TmM) × (1 + Ld × Id × IdM)

Explanation of the parts

The value you can see before taming Vw (Value wild) is the first part of that equation without the additive taming-bonus:

Vw = B × ( 1 + Lw × Iw × IwM)

After taming, dependant on the taming effectiveness (TE), the creature gets bonus levels, changing the value of Lw (the levels in the wild). After these are applied, the additive taming bonus is added, then the multiplicative taming-bonus is applied, making the value post-tamed (Vpt):

Vpt = (Vw × TBHM + Ta × TaM) × (1 + TE × Tm × TmM)

For bred creatures there is the possibility to add an imprinting-bonus by interact with the creature during its growing. The stat-values can be increased then according to

Vpt = (Vw × TBHM × (1 + IB × 0.2 × IBM) + Ta × TaM) × (1 + TE × Tm × TmM)

Then every level you level the creature up increases that stat again, making the final value (V, that you see on the creature) to

V = Vpt × (1 + Ld × Id × IdM)

To find out how many levels a creature has spend in wild levels (or in domesticated levels, if you forgot this), you can use this tool to extract them and see what values their offspring can inherit. The tool also has a file that contains all the values discussed above for most of the creatures (the newest may be missing).

Note on the bonuses

Ta and Tm are 0 in the most cases. For Health Ta is mostly 0.5 (exceptions are for example the Giganotosaurus with -63000 and the Griffin with -1000), for Damage in most cases Ta = 0.5 and Tm = 0.4 (that gives the creature a +50pp (percentage point) bonus, and after this the value is multiplied by (1 + 0.4 * TmM * TE), so it get's another 40% * 0.45 = 18% of the current value, dependent on the taming effectiveness).

The TBHM (Tamed Base Health Multiplier) is 1 for most species, i.e. doesn't change anything. Exceptions are for example the Brontosaurus, Doedicurus, Carbonemys, Pteranodon which each have a value of 0.9, and the Quetzal having 0.85. Most of the species from Aberration seem to have a multiplier of 0.96, so tamed dinos have slightly less Health than wild ones.

Example

A Rex has the following values for health

• B = 1100
• Iw = 20% = 0.2
• Id = 27% = 0.27 (on default settings that value is affected by the IdM of 0.2, resulting in 5.4 % = 0.054)
• Ta = 0.5 (on default settings that value is affected by the TaM of 0.14, resulting in 0.07)
• Tm = 0

Assuming that the Rex has 5 levels on health in the wild (Lw = 5), was leveled up 12 times after taming in health (Ld = 12) and was tamed with a taming effectiveness of 82% (TE = 0.82). The value you can see now is

V = (B * ( 1 + Lw * Iw * IwM ) + Ta * TaM) * (1 + TE * Tm * TmM) * (1 + Ld * Id * IdM)
V = (1100 * ( 1 + 5 * 0.2 * 1 ) + 0.5 * 0.14) * (1 + 0.82 * 0 * 0.44) * (1 + 12 * 0.27 * 0.2)
V = 3625.71

Another example with the melee damage of a Rex

• B = 100%
• Iw = 5% = 0.05
• Id = 10% = 0.1 (on default server settings multiplied by IdM = 0.17, resulting in 0.017 = 1.7 %)
• Ta = 0.5 (on default server settings multiplied by TaM = 0.14, resulting in 0.07 = 7 % points)
• Tm = 0.4 (on default server settings multiplied by TmM = 0.44, resulting in 0.176 = 17.6 %)

Assuming that the Rex has 5 levels on melee damage in the wild (Lw = 5), was leveled up 12 times after taming in melee damage (Ld = 12) and was tamed with a taming effectiveness of 82% (TE = 0.82). The value you can see now is

V = (B * ( 1 + Lw * Iw * IwM) + Ta * TaM) * (1 + TE * Tm * TmM) * (1 + Ld * Id * IdM)
V = (100% * ( 1 + 5 * 0.05 * 1) + 0.5 * 0.14) * (1 + 0.82 * 0.4 * 0.44) * (1 + 12 * 0.1 * 0.17)
V = 181.9%